Numerical investigation of the hydrothermal characteristics of water flow in compound microchannel heat sinks
List of Authors
  • Ahmed Fouad Al-Neama , Sarab Salih Shiko

Keyword
  • Compound MCHSs, Forced Convection, Conjugate Heat Transfer

Abstract
  • In the present work, three-dimensional numerical simulations of laminar forced convection flow of water in unique compound microchannel heat sinks (MCHSs) were investigated using computational fluid dynamics (CFD) modeling. The newly proposed MCHS is made up of circular microchannels slotted from the top within a trapezoidal shape, and its cooling effectiveness was compared to that of traditional rectangular MCHS. Each MCHS under consideration has the same hydraulic diameter and heat transfer surface area. Water volumetric flow rates (Q_in) with a wide range of values are used, ranging from 40 to 90 ml/min, with the fluid inlet temperature set to 20 oC. A constant heat flux boundary condition of 100 W/cm2 is supplied on the MCHS bottom. The results demonstrated that the inclusion of reentrant trapezoidal shapes can disrupt both hydrodynamic (δ_hy) and thermal boundary layers (δ_th), as well as accelerate fluid flow and mixing in the main flow, resulting in a significant heat transfer enhancement. Furthermore, at Q_in=90 ml/min, the average Nusselt number (〖Nu〗_avg) of compound MCHS increased by 2.16%, while total pressure drop (∆P) and total thermal resistance (R_th) decreased by 1.73% and 1.57%, respectively, when compared to the straight rectangular counterpart.

Reference
  • 1. Ghani, I. A., Sidik, N. A. C., & Kamaruzaman, N. (2017). Hydrothermal performance of microchannel heat sink: The effect of channel design. International Journal of Heat and Mass Transfer, 107, 21–44.

    2. Steinke, M. E., & Kandlikar, S. G. (2004). Single phase heat transfer enhancement technique in micro-channel and mini-channel flows, in: international conference on Micro-channel and Mini-channels, New York, ASME, 141–148, ICMM 2004-2328.

    3. Dewan, A. & Srivastava, P. (2015). A review of heat transfer enhancement through flow disruption in microchannel. Journal of Thermal Science, 24, 203–214.

    4. Xie, G. N., Liu, X. T., Yan, H. B., & Qin, J. (2017). Turbulent flow characteristics and heat transfer enhancement in a square channel with various crescent ribs on one wall, Int. J. Heat Mass Tran, 115, 283–295.

    5. Wang, G., Qian, N., & Ding, G. (2019). Heat transfer enhancement in microchannel heat sink with bidirectional rib. Int. J. Heat Mass Transf, 136, 597–609.

    6. Chen, H., Chen, C., Zhou, Y., Yang, C., Song, G., Hou, F., Jiao, B., & Liu, R. Evaluation and Optimization of a Cross-Rib Micro-Channel Heat Sink. (2022). Micromachines, 13, 132.

    7. Al-Neama, A. F., Kapur, N., Summers, J., & Thompson, H. M. (2018). Thermal management of GaN HEMT devices using serpentine minichannel heat sinks. Applied Thermal Engineering, 140, 622–636.

    8. Al-Neama, A. F. M. (2018). Serpentine minichannel liquid-cooled heat sinks for electronics cooling applications, Dissertation submitted to the University of Leeds, school of mechanical engineering.

    9. Chai, L., Xia, G., Wang, L., Zhou, M., & Cui, Z. (2013). Heat transfer enhancement in microchannel heat sinks with periodic expansion-constriction cross-sections. International Journal of Heat and Mass Transfer, 62, 741–751.

    10. Deng, D., Wan, W., Tang, Y., Shao, H., & Huang, Y. (2015). Experimental and numerical study of thermal enhancement in reentrant copper microchannels. International Journal of Heat and Mass Transfer, 91, 656–670.

    11. Abad, J. M. N., Alizadeh, R., Fattahi, A., Doranehgard, M. H., Alhajri, E., & Karimi, N. (2020). Analysis of transport processes in a reacting flow of hybrid nanofluid around a bluff-body embedded in porous media using artificial neural network and particle swarm optimization. Journal of Molecular Liquids, 313, 113492.

    12. Al-Neama, A. F., Khatir, Z., Kapur, N., Summers, J., & Thompson, H. M. (2018). An experimental and numerical investigation of chevron fin structures in serpentine minichannel heat sinks. International Journal of Heat and Mass Transfer, 120, 1213-1228.

    13. Steinke, M.E. & Kandlikar, S.G. [2006]. Single-phase liquid friction factors in microchannels. Int. J. Therm. Sci, 45, 1073–1083.

    14. Kandlikar, S.G. Chapter 3 - Single-phase Liquid Flow in Minichannels and Microchannels, Heat Transfer and Fluid Flow in Minichannels and Microchannels, second ed., Butterworth-Heinemann, Oxford, 2014, pp. 103–174.

    15. Shah, R.K. & London, A.L. [1978]. Laminar Flow Forces Convection in Ducts; Academic Press: New York, NY, USA.

    16. Phillips, R.J. Microchannel Heat Sinks. [1987]. Ph.D. Thesis, Massachusetts Institute of Technology, Cambridge, MA, USA.