Fit for work: A bibliometric review of laboratory ergonomics
List of Authors
  • Khairul Hafezad Abdullah , Mohd Firdaus Roslan

Keyword
  • laboratory, ergonomics, movement, posture, bibliometrics

Abstract
  • The advent of new technologies in the modern era has significantly altered the essence of labour. The field of laboratory ergonomics is an indispensable area of research that endeavours to recognise and tackle ergonomic concerns within laboratory environments. The objective of this bibliometric analysis is to conduct a comprehensive examination of the current literature on laboratory ergonomics while also identifying potential research gaps that require further investigation. The bibliometric parameters of this study were analysed using the Scopus and Web of Science (WoS) databases. The bibliometric datasets, which included the number of publications and author keywords, were analysed using the ScientoPy software. The results suggest that there are varying trends in the research of laboratory ergonomics, as evidenced by fluctuations in the yearly publication figure. The United States is recognised as a leading contributor to laboratory ergonomics research, as evidenced by its significant number of publications. Engineering, Sport Sciences, and Psychology fields have garnered significant research interest, whereas other domains, such as Behavioural Sciences and Public, Environmental & Occupational Health, have received comparatively lesser attention. The investigation additionally recognised nascent patterns in laboratory ergonomics research, including the escalating curiosity in examining the impacts of movement and posture on the physical well-being of laboratory personnel. The discoveries mentioned offer significant perspectives on the present status of laboratory ergonomics research, underscore domains that necessitate additional exploration, and enlighten future research trajectories.

Reference
  • 1. Abdullah, K. H., & Abd Aziz, F. S. (2021). Mapping of laboratory safety research: a bibliometric review. Malaysian Journal of Public Health Medicine, 21(1), 303-310.

    2. Abdullah, K. H., & Sofyan, D. (2023). Machine learning in safety and health research: a scientometric analysis. International Journal of Information Science and Management, 21(1), 17-37.

    3. Abdullah, K. H., Roslan, M. F., & Ilias, M. (2023). A bibliometric analysis of literature review articles published by Malaysian authors. Jurnal Penyelidikan Sains Sosial, 6(18), 8 - 26.

    4. Abdullah, N. A. C. (2021). Ergonomics measurement tool: a survey from public sectors employees. Central Asia and the Caucasus, 22(5), 197-207.

    5. Agrawal, P. R., Maiya, A. G., Kamath, V., & Kamath, A. (2014). Musculoskeletal disorders among medical laboratory professionals-a prevalence study. Journal of Exercise Science and Physiotherapy, 10(2), 77-81.

    6. AlNekhilan, A. F., AlTamimi, A. M., AlAqeel, B. Y., AlHawery, A. A., AlFadhel, S. F., & Masuadi, E. M. (2020). Work-related musculoskeletal disorders among clinical laboratory workers. Avicenna Journal of Medicine, 10(01), 29-34.

    7. Alyan, E., Saad, N. M., & Kamel, N. (2021). Effects of workstation type on mental stress: fNIRS study. Human Factors, 63(7), 1230-1255.

    8. Ates, H. C., Nguyen, P. Q., Gonzalez-Macia, L., Morales-Narváez, E., Güder, F., Collins, J. J., & Dincer, C. (2022). End-to-end design of wearable sensors. Nature Reviews Materials, 7(11), 887-907.

    9. Benos, L., Tsaopoulos, D., & Bochtis, D. (2020). A review on ergonomics in agriculture. part II: Mechanised operations. Applied Sciences, 10(10), 3484.

    10. Bernold, L. E., Lorenc, S. J., & Davis, M. L. (2001). Technological intervention to eliminate back injury risks for nailing. Journal of Construction Engineering and Management, 127(3), 245-250.

    11. Borowski, P. F. (2021). Innovative processes in managing an enterprise from the energy and food sector in the era of industry 4.0. Processes, 9(2), 381.

    12. Gagnon, M. (2005). Ergonomic identification and biomechanical evaluation of workers’ strategies and their validation in a training situation: summary of research. Clinical Biomechanics, 20(6), 569-580.

    13. Gao, L., Zhang, G., Yu, B., Qiao, Z., & Wang, J. (2020). Wearable human motion posture capture and medical health monitoring based on wireless sensor networks. Measurement, 166, 108252.

    14. Gupta, R., Gupta, S. H., Agarwal, A., Choudhary, P., Bansal, N., & Sen, S. (2020, May). A wearable multisensor posture detection system. In 2020 4th International Conference on Intelligent Computing and Control Systems (ICICCS) (pp. 818-822). IEEE.

    15. Hoskins, D. B., & Erickson, J. (1998). Laboratory ergonomics the wake-up call: A Case Study. Chemical Health & Safety, 5(1), 20-38.

    16. Lab Manager. (2009). Laboratory Ergonomics. Lab Manager. https://www.labmanager.com/lab-health-and-safety/laboratory-ergonomics-20312

    17. Liu, T., Liu, X., Li, Y., Liu, S., & Cao, C. (2021). Evolving trends and research hotspots in disaster epidemiology from 1985 to 2020: a bibliometric analysis. Frontiers in Public Health, 9, 720787.

    18. Maulik, S., & Iqbal, R. (2013). Occupational health and musculoskeletal symptoms among Indian medical laboratory technicians. Journal of Occupational Health and Epidemiology, 2(3), 82-92.

    19. Mukhtad, A. A., Aminese, H. A., Mansor, M. A., Mansour, H. S., & Elmesmary, H. A. (2018). Ergonomic risk assessment among healthcare laboratory technicians in Benghazi medical centre. International Journal for Advance Research and Development, 3(3), 318-327.

    20. Nalunga, J., Sekimpi, P., Kabanda, T. M., & Nakayaga, J. K. (2023). Work related musculoskeletal disorders among staff at selected laboratories in Kampala, Research Square, 1-16.

    21. Oladeinde, B. H., Ekejindu, I. M., Omoregie, R., & Aguh, O. D. (2015). Awareness and knowledge of ergonomics among Medical Laboratory Scientists in Nigeria. Annals of Medical and Health Sciences Research, 5(6), 423-427.

    22. Parsons, K. C. (2000). Environmental ergonomics: a review of principles, methods and models. Applied Ergonomics, 31(6), 581-594.

    23. Rakhmonkulov, F. P., & Usarov, S. A. (2019). Organisation of practical and laboratory activities in the educational process. European Journal of Research and Reflection in Educational Sciences, 7(12), 539-547.

    24. Rebelo, F., Noriega, P., Vilar, E., & Filgueiras, E. (2021). Ergonomics and human factors research challenges: The ErgoUX lab case study. In Advances in Ergonomics in Design: Proceedings of the AHFE 2021 Virtual Conference on Ergonomics in Design, July 25-29, 2021, USA (pp. 912-922). Springer International Publishing.

    25. Roslan, M., Abd Razak, M., Abdullah, K., Ishak, N., & Ishak, N. (2023). A bibliometric analysis of work stress research: three decades (1992-2022) publication trends. International Journal of Advanced Research in Education and Society, 5(1), 1-14.

    26. Ruiz-Rosero, J., Ramirez-Gonzalez, G., Williams, J. M., Liu, H., Khanna, R., & Pisharody, G. (2017). Internet of things: a scientometric review. Symmetry, 9(12), 1-32.

    27. Sari, A. D., Rahmillah, F. I., & Aji, B. P. (2017, June). Implementation of 5S method for ergonomic laboratory. In IOP conference series: materials science and engineering (Vol. 215, No. 1, p. 012032). IOP Publishing.

    28. Serrano-Pozo, A., Aldridge, G. M., & Zhang, Q. (2017). Four decades of research in Alzheimer’s disease (1975–2014): a bibliometric and scientometric analysis. Journal of Alzheimer’s Disease, 59(2), 763-783.

    29. Simpson, L., Maharaj, M. M., & Mobbs, R. J. (2019). The role of wearables in spinal posture analysis: a systematic review. BMC Musculoskeletal Disorders, 20(1), 1-14.

    30. Suhonen, S., & Tuominen, E. L. (2020). Quit your slouching!: Using wearable sensors to investigate engineering laboratory work ergonomics. In Engaging Engineering Education’: SEFI 48th Annual Conference Proceedings. University of Twente.

    31. Watson, C. R., Watson, M., & Sell, T. K. (2017). Public health preparedness funding: key programs and trends from 2001 to 2017. American Journal of Public Health, 107(S2), S165-S167.

    32. Wilson, J. R. (2000). Fundamentals of ergonomics in theory and practice. Applied Ergonomics, 31(6), 557-567.

    33. Winnicka-Jasłowska, D., Jastrzębska, M., & Tymkiewicz, J. (2017). Ergonomics of laboratory rooms–case studies based on the geotechnical laboratories at the Silesian University of Technology. Architecture, Civil Engineering, Environment, 10(1), 35-41.

    34. Wuni, I. Y., Shen, G. Q., & Osei-Kyei, R. (2019). Scientometric review of global research trends on green buildings in construction journals from 1992 to 2018. Energy and buildings, 190, 69-85.

    35. Xu, W., Furie, D., Mahabhaleshwar, M., Suresh, B., & Chouhan, H. (2019). Applications of an interaction, process, integration and intelligence (IPII) design approach for ergonomics solutions. Ergonomics, 62(7), 954-980.