Simulation of toolpaths using 3D method strategies for complex shape in milling application
List of Authors
  • MN Talibin

Keyword
  • High-speed machining, CNC milling, Toolpaths strategy

Abstract
  • Several strategies can be used for machining complex 3D shapes on a 3-axis CNC vertical milling machine in Autodesk Inventor Professional software. However, it is challenging to determine suitable strategies without guidance. Among the strategies involved are Scallop, Radial, Spiral, and Morphed Spiral. The purpose of this study is to compare the toolpaths strategy in terms of machining time by using high-speed machining parameters. A hemisphere shape and a fillet feature in the part are considered complex shapes due to their convex and concave surfaces. There are two step machining processes involved, which are roughing and finishing. Comparison time is focused on finishing the process using those strategies. Actual fixed machining parameters like tool diameter, feed rate, spindle speed, stepover, and cutting depth are used to make simulations of the toolpaths. Based on the simulation, the radial strategy has the shortest machining time and cutting length by more than fifty percent (50%) compared to other strategies. This is due to the fact that this technique generates passes along the arc's radii, which are subsequently projected down on the surfaces. The passes can be linked in a zig-zag pattern between the outer and inner radius, either from inside to outside or outside to inside. However, collisions between the cutting tool and the workpiece must be closely monitored. As a result, cutting length must also be addressed when deciding to use this strategy. In conclusion, high-speed machining with the right machining strategy is essential for increased productivity.

Reference
  • 1. Groover, M.P. (2013). Fundamentals of Modern Manufacturing: Materials, Processes, and Systems, 4th ed. New York, ABD: John Wiley & Sons.

    2. Baskar, N., Asokan, P., Prabhaharan, G., Saravanan, R. (2005). Optimization Of Machining Parameters for Milling Operations Using Non-Conventional Methods. Int. J. Adv. Manuf. Technol ;25(11-12): 1078-88.

    3. Gökçe, H., Yeşilay, R., Uçak, N., Teke A, & Çiçek, A (2019). Improvement of Machining Processes: A Case Study. 7th International Symposium on Innovative Technologies in Engineering and Science, ISITES2019 SanliUrfa – Turkey, 634-641.

    4. Majerik, J., Bajcik, S., & Jambor, J (2010). Automation of the production process for metallic flexible diaphragm with CAD/CAM system CATIA V5R19 support, in: Annals of DAAAM for 2010 & Proceedings of the 21st International DAAAM World Symposium Intelligent Manufacturing & Automation: Focus on Theory, Practice and Education: World Symposium, ISSN 1726-9679. Vienna University of Technology, Zadar, Croatia, pp. 0623–0624.

    5. Jennifer, M. & Ed, G (2022). Autodesk Inventor CAM 2022: Milling Fundamentals (Mixed Units) -1st Edition. VA. ASCENT.

    6. Lacalle, L.N., Lamikiz, A., Sánchez, J.A. & Arana J.L. (2002). Improving the surface finish in high-speed milling of stamping dies. J Mater Process Technol 123:292–302.

    7. Franse, J (1990). Manufacturing techniques for complex shapes with submicron accuracy. Reports on Progress in Physics, 53(8), 1049–1094.

    8. K. C.Gan & M.S, Abu Mansor (2020). High-Speed Machining for CNC Milling Simulation Using CAM Software. In book Advances in Manufacturing Engineering Springer. (pp.703-713).

    9. A.M. Shafie & H. Abdullah (2020). Simulation of Tool Path Using Conventional Method for Milling Application. Research Progress in Mechanical and Manufacturing Engineering Vol 1, No. 1. 132-138.

    10. Scandiffio I., Diniz A. E., de Souza A. F. (2016). Evaluating surface roughness, tool life, and machining force when milling free-form shapes on hardened AISI D6 steel. The International Journal of Advanced Manufacturing Technology 82(9):2075-2086.